Snap together straights, corners, Tangent curves and Vitality peaks to scale, watch the lighting run through it, and walk away with the exact list of files to print.
Free for now, with nothing held back. No sign-up.
Every piece in the palette matches a file in the Duality listings, so what you draw is what you print.
Straights from 100 to 400 mm, 45° and 90° corners, Tangent curves at R100, R175 and R225, Tee and Cross junctions, all ten Vitality pieces, 707 corners and the up/down pieces that leave the wall.
Paint hexagons onto the honeycomb. Shared edges count once, and connectors are tallied as 2-way or 3-way, for standard or NEST builds.
File names straight from the listings, like E_Tangent_90_R175 and Skin_MatteHex_90_250_LH, with quantities, couplings and the right left- or right-hand skin. Download it as CSV.
Preview solid, gradient, rainbow, chase and breathe effects running along the strip from the controller, the way WLED will drive it.
Overall size in metres and inches, metres of LED strip, LED count at your density, and peak current at 5 V so you buy the right supply.
Designs save in your browser and as .json files you can reopen or send. Six diffuser skins, PNG pictures, and dimensions you can tune to your printed parts.
Every feature is open: unlimited parts, the full print list, saving and downloads. Nothing to install and no account.
No. Trackline is an independent planner. The Duality part files are designed and sold by their creator on Printables, and you need your own copy of them to print anything.
Shapes and part names come from the published files and the 1:20 layout stencils. Some measurements, like Vitality angles, are estimated, so you can correct them in the planner.
In your browser, automatically. To move a design to another device or share it, download it as a .json file and open it there.
Write to [email protected] with what you were building. A downloaded .json of the design helps a lot.